Swiss Fibre Net AG: Competition authority paves the way for innovative fibre optic industry solution

09.11.2022 | from Swiss Fibre Net AG


Swiss Fibre Net AG

09.11.2022, The Secretariat of the Competition Commission (COMCO) has been assessing the SFN shunting model developed by Swiss Fibre Net AG (SFN). It has checked whether the industry solution satisfies the competition law requirements for network access. The COMCO secretariat has now approved the proposal under antitrust law. The option of promoting the further expansion of the fibre optic networks with some 1.5 million new connections, based on the SFN patch model or using the conventional P2P architecture, represents an opportunity for telecom providers to compete fairly and to be involved in the expansion of the network. Consumers can then benefit from this improved FTTH coverage and better pricing. The solution is also helping to bring the ongoing COMCO investigation into Swisscom to a swift conclusion. In late 2020, COMCO banned Swisscom from denying competitors access to end-to-end lines (layer 1) in the further expansion of the fibre optic network as a precautionary measure.

In March 2022, SFN explained (see media release of March 29, 2022) why telecom providers including energy suppliers and cable network operators, are currently at a disadvantage because of the technology used by Swisscom for the expansion of the fibre optic network: in areas where it is driving the expansion on its own, Swisscom is utilising a technology that, contrary to the established industry standard (P2P1), does not allow its competitors direct access (layer 1) to the glass fibre (P2MP architecture2).

SFN is calling for the further expansion of FTTH networks to be based on a cooperative approach using either P2P or P2MP. Energy suppliers and cable network operators can contribute their infrastructure to the joint network expansion based on the principles of efficiency and effectiveness. It is a win-win situation. In the SFN marshalling model based on the P2MP design, Layer1 network access is ensured by the marshalling compatibility of the glass fibre in the local distribution systems of the cable network operators3.

The SFN shunting model based on P2MP combines the best of both solutions: Thanks to the P2MP- L1 design, it has been proven that it can be built around 30% more cost-effectively4 and passive Layer 1 access is still possible.

Andreas Waber, CEO of Swiss Fibre Net AG, explains: "Over the last few months, we have been working intensively with various stakeholders in the industry to specify the SFN patching model. The challenge was to find a model that combines the cost-effective approach of P2MP networks with the openness and Layer 1 accessibility of P2P. This has now been achieved and has been accepted by the competition

SFN model is a fast, cost-effective solution - especially in underserved areas
The concept is very attractive in terms of supply technology and offers secure, rapid access to all telecom providers in communities and regions that have not yet been provided with an FTTH fibre optic network in relation to their telecom infrastructure. The conclusion of the authority assessment is significant for SFN and the other telecom providers. The P2MP-L1 industry standard aimed at in the SFN shunting model offers a wide range of real benefits: far fewer trenches have to be dug for the fibre optic connections and fewer coverings need to be restored. This significantly reduces disruption during the construction phase. As a rule, the existing installations from cable network companies can be used and this underlines the sustainability of the model. The SFN shunting model is currently the most economical and the fastest possible expansion option. It can also be easily combined with P2P networks in cooperation projects.

Underserved, rural areas in particular can be developed more quickly and cost-effectively thanks to the use of the P2MP-L1 model, which will make a significant contribution to overcoming the digital divide between urban and rural areas.

The SFN routing model is also of particular importance for the 400,000 connections that have already been built by Swisscom but cannot be marketed due to COMCO’s decision of December 14, 2020. The SFN shunting model could also be implemented quickly, cost-effectively and in compliance with competition law in these cases too, and this in the interests of all market stakeholders, especially the end customers.

The solution, which has now been approved under competition law, is also in line with the political direction desired: parliament has thus far refrained from regulating fibre optic technology for the last mile. However, real, non-discriminatory fibre optic access (layer 1) must be guaranteed in all cases. This principle is guaranteed with the SFN model. In conjunction with institutional investors, SFN will take part in in FTTH construction projects across Switzerland, thus facilitating FTTH expansion in Switzerland.

Swiss Fibre Net AG
Swiss Fibre Net AG is a joint venture between local energy suppliers and cable network operators in Switzerland. It connects the local fibre optic networks of its network partners to form the extensive, standardised and open "Swiss Fibre Net" and offers this for use by national telecom providers for use on a non-discriminatory basis. This means that Swiss Fibre Net AG is the guarantor of competition within the telecommunications market


Contact:
Andreas Waber
CEO Swiss Fibre Net AG
andreas.waber@swissfibrenet.ch
+41 79 668 90 78

--- END press release Swiss Fibre Net AG: Competition authority paves the way for innovative fibre optic industry solution ---

Source:
HELP.ch


More information and links:



Swissnewsnow.com

On Swissnewsnow.com are published media releases, information from Swiss companies and Swiss authorities.

HELP Media AG on social networks
Facebook Twitter Instagram LinkedIn Pinterest Flickr

Subscription

Publish your media releases as a subscription and benefit from two free media releases.

Subscription 10 media releases (+2 free)
Subscription now »

Publish media release

To publish your own press release on Swissnewsnow.com, click on the following link:

Publish media release now »

Contact

Email:
info@help.ch

Address:
HELP Media AG
Thurgauerstrasse 40, 8050 Zurich


Copyright © 1996-2022 HELP Media AG, CH-8050 Zurich. All statements without guarantee. Terms and Conditions, Terms of Use & Privacy Policy